Properties:
Related Categories |
Additional Standards,
Analytical Standards,
Analytical/Chromatography,
Proficiency Testing,
Solids/Soils Hazardous Waste Organic PTs,
|
grade
|
certified reference material
|
packaging
|
ampule of 1 × 30 g
|
mfr. no.
|
RTC, SPE-008MA
|
matrix
|
soil
|
storage temp.
|
2-8°C
|
Description:
General description
This proficiency testing sample is produced in accordance with ISO/IEC 17043:2010. All information regarding the use of this material can be found in the reporting packet supplied for each sample.
Other Notes
Proficiency testing samples are presented as single blind. No values for the samples are released until the testing period concludes. Values of analytes vary lot to lot.
Sigma-Aldrich RTC Proficiency Testing Schedule (2015-2016)
Soils
LPTP15-S1 Feb 4 - March 20, 2015
LPTP15-S2 April 15 - May 29, 2015
LPTP15-S3 July 22 - Sept 4, 2015
LPTP15-S4 Oct 7 - Nov 20, 2015
LPTP16-S1 Feb 3 - March 18, 2016
LPTP16-S2 April 13 - May 27, 2016
LPTP16-S3 July 20 - Sept 2, 2016
LPTP16-S4 Oct 5 - Nov 18, 2016
Quick-Turn Study - (non-scheduled proficiency test that is available at any time)
Preparation Note
The PT sample size provide is 33 g of soil. The soil has been chemically stabilized with 6 mL of methanol to minimize degradation of the sample. The PT sample has been sized to 100 mesh. Required storage condition is 4o C. The sample has been intentionally prepared with an apparent headspace. The sample was fortified with a blended gasoline from three different refineries located in the Mountain West. This sample can be analyzed by methods including but not limited to MA VPH, EPA 8015M, NWTPH Gx, and IOWA OA-1.
Sample Preparation
The 25 g soil PT sample is preserved in 25 mL methanol.
Mix and sample the soil at 4° C to minimize volatilization of the contents.
The sample is a soil containing gasoline range organics (GRO) to be extracted and analyzed using the MA VPH method.
On the report form, list the extraction technique and determinative method used for analysis of this sample.
The method used must be reported. If multiple methods are used for preparation and/or analysis, a separate report form must be used for each preparation and analysis method.
Report on a wet weight basis.
Safety:
Symbol
GHS07, GHS08
Hazard statements
H302-H340-H350-H370-H373
Precautionary statements
P201-P260-P280-P301 + P312 + P330-P308 + P311
RIDADR
NONH for all modes of transport