Properties:
Related Categories |
Additional Standards,
Analytical Standards,
Analytical/Chromatography,
Proficiency Testing,
Water Pollution/Waste Water Organics,
|
packaging
|
ampule of 1 × 2 mL
|
mfr. no.
|
RTC, PEO-414
|
concentration
|
in H2O
|
storage temp.
|
2-8°C
|
Description:
General description
This proficiency testing sample is produced in accordance with ISO/IEC 17043:2010. All information regarding the use of this material can be found in the reporting packet supplied for each sample.
Other Notes
Proficiency testing samples are presented as single blind. No values for the samples are released unti the testing period concludes. Values of analytes vary lot to lot.
Proficiency Testing Schedule (2017-2018)
Wastewater
WP17-1 January 18 - March 3, 2017
WP17-2 March 29 - May 12, 2017
WP17-3A May 17 - June 30, 2017
WP17-3B July 12 - August 25, 2017
WP17-4 September 27 - November 10, 2017
WP17-5 November 22 - January 5, 2018
WP18-1 January 17 - March 2, 2018
WP18-2 March 28 - May 11, 2018
WP18-3A May 16 - June 29, 2018
WP18-3B July 11 - August 24, 2018
WP18-4 September 26 - November 9, 2018
WP18-5 November 21 - January 4, 2019
Quick-Turn Study - (non-scheduled proficiency test that is available at any time)
Preparation Note
This PT sample is packaged as a 1.5 mL concentrate.
The solvent for this sample is water.
The PT sample is not preserved.
Sample preparation
Fill a 100 mL Class A Volumetric Flask to volume with organic free reagent water.
Allow the ampule concentrate to equilibrate to room temperature.
Open ampule PEO-414 and withdraw 20 μL of the solution using a gas tight microsyringe.
Inject the concentrate into the expanded area of the flask well below the surface of the water.
Stopper the flask and mix by gentle inversion 3 times. Excessive mixing will result in loss of volatiles and should be avoided.
This represents the sample for analysis.
Safety:
RIDADR
NONH for all modes of transport