Sigma-Aldrich/TSKgel® GMHHR-M HPLC Column/817392/

•  eCl@ss 32110501

Properties:

Description:

Compatibility

THF can be replaced with acetone, ethanol, quinoline, benzene, o-dichlorobenzene, ethyl acetate, dodecane, FC-113, carbon tetrachloride, dichloromethane, dichloroethane, trichloroethane, n-hexane, cyclohexane, xylene, tetrahydrofuran, chloroform, 1,4-dioxane, hexafluoroisopropanol, toluene, 1-chloronaphthalene, dimethylaceto acetamide, methyl ethyl ketone, trichlorobenzene, m-cresol, dimethylformamide, methylpyrrolidone, o-chlorophenol/chloroform, dimethyl sulfoxide, pyridine

General description

The TSKgel H_HR column line consists of eight columns with different pore sizes, TSKgel G1000H_HR through TSKgel G7000H_HR, and five columns with an extended linear range of the calibration curve. All TSKgel H_HR-type columns are shipped in THF, which can be exchanged for a much broader range of organic solvents than TSKgel H_XL columns, although Hxl columns are more inert. The maximum operating temperature for most TSKgel H_HR-type columns is 140°C, except for GMH_HR columns, which can only be used up to 80°C. TSKgel H_HR-type columns are conventional GPC columns with dimensions of 7.8mm ID x 30cm.

TSKgel GMH_HR-M mixed bed columns are packed with rigid, multiple pore size, polymer beads. Mixed bed columns are commonly used for unknown samples and for the analysis of polymers with a broad molecular weight distribution. TSKgel GMH_HR-M columns are shipped in THF, which can be exchanged for a wide variety of organic solvents. TSKgel GMH_HR-M columns are available in 5 and 13μm particle sizes. We recommend the use of TSKgel GMH_HR-M(S) (13μm) to prevent or limit shearing of ultra high molecular weight polymers, if this occurs when using small (5μm) particle size columns.

Physical form

Shipped in THF.

Recommended products

Discover LiChropur reagents ideal for HPLC or LC-MS analysis

Legal Information

TSKgel is a registered trademark of Tosoh Corporation