Properties:
Related Categories |
Analytical/Chromatography,
Gas Chromatography (GC),
Gas Purification and Gas Management,
In-Line Purifiers (Remove a Single Contaminant),
Oxisorb Oxygen Scrubber,
|
fitting size
|
1/4 in.
|
Description:
General description
This trap will reduce oxygen and moisture to less than 1 ppm when the incoming level of oxygen is below 15 ppm and the incoming level of moisture is below 10?ppm. Use alternative traps when the levels in the incoming gas exceed these values. The kit includes a cartridge, and fittings for installation. Replacing the cartridge is simple, and can be performed quickly.
Dimensions:
• Cartridge and Fittings: 91/4?in. (23.5?cm) long x 2 in. (51 mm) diameter
• Cartridge Only: 47/8 in. (12.4 cm) long x 11/8?in. (29?mm) diameter
Application
N2, CO2 and CO2-N2 gas mixture may be passed through Oxisorb® Oxygen Scrubber before being used in an experimental study, done to monitor the kinetics of sulphate and acetate uptake, by the sulphate-reducing bacteria Desulfobacter postgatei.
Legal Information
Oxisorb is a registered trademark of Messer Group GmbH
Safety:
Hazard statements
H271-H301 + H311-H314-H317-H330-H334-H340-H350-H361f-H372-H410
Precautionary statements
P201-P210-P260-P280-P284-P301 + P310 + P330-P303 + P361 + P353-P304 + P340 + P310-P305 + P351 + P338-P308 + P313-P371 + P380 + P375-P403 + P233
Personal Protective Equipment
Eyeshields, Faceshields, full-face particle respirator type N100 (US), Gloves, respirator cartridge type N100 (US), type P1 (EN143) respirator filter, type P3 (EN 143) respirator cartridges
RIDADR
UN 1463 8(6.1)(5.1) / PGII