Properties:
Related Categories |
Analytical Reagents,
Analytical/Chromatography,
Titration,
Volumetric Titration Reagents
|
packaging
|
1 l in Glass bottle (1084501000)
|
bp
|
118?°C (1013?hPa)
|
density
|
1.06?g/cm3 (20?°C)
|
flash point
|
40?°C
|
pH
|
<0.5 (h?o,="" 20?°c)="">0.5> |
storage temp.
|
Store at +15°C to +25°C.
|
specifications
|
Amount-of-substance concentration: 0.1000 mol/l
|
|
The concentration of this volumetric solution was determined with volumetric standard Tris(hydroxymethyl)aminomethane (article number 1.02408). The determined titer at 20°C was 1.000 with an expanded measurement uncertainty of ± 0.004 (k=2 coverage factor for 95% coverage probability). The certified value is traceable to primary standard NIST SRM 723e (NIST: National Institute of Standards and Technology, USA) by means of volumetric standard Tris(hydroxmethyl)aminomethane, measured in the accredited calibration laboratory of Merck KGaA, Darmstadt, Germany in accordance to DIN EN ISO/IEC 17025.
|
Safety:
Hazard Statement(s)
H226: Flammable liquid and vapour.
H314: Causes severe skin burns and eye damage.
Precautionary Statement(s)
P210: Keep away from heat.
P280: Wear protective gloves/ protective clothing/ eye protection/ face protection.
P301 + P330 + P331: IF SWALLOWED: Rinse mouth. Do NOT induce vomiting.
P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P308 + P310: IF exposed or concerned: immediately call a POISON CENTER or doctor/ physician.
Storage class
3 Flammable liquids
WGK
WGK 1 slightly water endangering
Disposal
12
Inorganic acids and anhydrides thereof should first be diluted or hydrolyzed by stirring carefully into ice water and then neutralized (protective gloves, fume cupboard!) with sodium hydroxide solution (Cat. No. 105587). Before filling into container D, check the pH with pH universal indicator strips (Cat. No. 109535). Fuming sulfuric acid should be carefully stirred dropwise into 40 % sulfuric acid (Cat. No. 109286). Ensure that plenty of ice is available for cooling! When sufficiently cool, treat the highly concentrated sulfuric acid as described above. Analogous to this procedure, other anhydrides can be converted into their corresponding acids. Acid gases (e.g. hydrogen halide, chlorine, phosgene, sulfur dioxide) can be introduced into dilute sodium hydroxide solution and after neutralization disposed of in container D.
Hazard Pictogram(s)
GHS02
Hazard Pictogram(s)
GHS05
Hazard Symbols
Corrosive
Declaration (railroad and road) ADR, RID
UN 2920 , 8 (3), II
Declaration (transport by air) IATA-DGR
UN 2920 , 8 (3), II
Declaration (transport by sea) IMDG-Code
UN 2920 , 8 (3), II, Segregation Group: 1 (Acids)
Categories of danger
flammable, corrosive
R Phrase
R 10-35
Flammable.Causes severe burns.
S Phrase
S 26-36/37/39-45
In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.Wear suitable protective clothing, gloves and eye/face protection.In case of accident or if you feel unwell, seek medical advice immediately (show the label where possible).